top banner 2

  The Security Universe at Your Fingertips:
     Attend iSecurity, Thursday, June 13, 2013, 10:00 am - 4:00 pm ETwww.isecuritytradeshow.com

Video Surveillance Storage – New Ways to Solve Old Problems

There are really just two main functions of a video surveillance system: to see what the camera sees (in real-time or live) and to see what the camera saw (stored). The most widely utilized of the two functions – to see what the camera saw – is storage or being able to store what the camera sees and to playback the video when desired. 

In the past, this was accomplished via video cassette tapes – lots and lots of video cassette tapes. The next technological advancement was to use computer hard disk drives. This reduced costs by eliminating the video tapes, the daily or weekly labor associated with tape rotation as well as the costs of off-site storage. In addition, this greatly decreased the time it took to retrieve a specific incident for playback. The video surveillance markets rapid move towards the wide spread adoption of IP-enabled devices and IT technologies has provided improvements in the quality of the stored video, the length of time or retention of the stored video while reducing the cost of storage and improving the overall reliability of the video surveillance system.

The improvements in the video quality come from improvements in the digital encoding of the video. The most significant of these improvements in the video quality comes from the use of the H.264 encoding standard. H.264 provides an increase in both the quality of the video image and in the compression of the images. Being able to have a higher quality image that requires less storage space can increase the recognition and identification of an event, while increasing the total number of hours, days, weeks or even months stored without increasing storage capacity.

However; improvements in the quality and compression of video are not the only areas that can provide increased storage capacity, retention time and reliability. The use of new techniques in video storage management, IT-based storage solutions and redundancy technologies can provide an even greater increase capacity, retention and reliability.

One of the earliest techniques was the use of time-of-day and day-of-week recording. This was the ability of the video surveillance system to automatically turn on or off the recording function based on not needing to record images or as many images per second at certain times. This type of selective recording did extend the total number of hours, days, weeks and even months that could be retained. But it also had the potential to not be recording anything during an event. There are now video surveillance systems that can take this concept a step farther. By adding some software intelligence and processing capabilities into the video system, it is now possible to automatically reduce the stored video in between the motion triggered events. There are several ways to accomplish this, but one of the most common is to automatically reduce or delete some of the recorded frames.

The actual storage location and type is another area where the adoption of IP and IT technologies has provided improvements in capacity, reliability and cost. Direct Attached Storage (DAS) is currently one of the most common types of video surveillance storage. It is basically one or more computer hard disk drives installed into the DVR or NVR. In some cases, it is the best solution due to a small number of cameras or the remote location of a facility. But DAS solutions in a facility where a large number of cameras are required and access to an enterprise’s network is available can be inefficient. There is the potential to waste or not use potential storage space. Not all video ports on all DVRs and NVRs are always used. But many DVRs and NVRs have few options in available disk drive sizes. Thus, many DVRs and NVRs have disk drives installed that are far larger than the total number of in use camera ports require. This wastes potential storage space, increases costs and increases the amount of power consumed, the heat generated and maintenance costs.

The use of IP-enabled DVRs, NVRs and IP cameras has opened up the use of IT based network storage technologies, like Network Attached Storage (NAS) or Storage Area Networks (SAN). The use of either a NAS or a SAN is more a question of who does the Enterprise IT group support. There are technological differences between the two, but what is more important are the similarities. Both solutions support Ethernet connectivity, usually 100/1000 Base-T(x). Both support the use of standard computer hard disk drive that can also be configured to support several different types of Redundant Array of Independent Disks redundancy. The use of a NAS or SAN can allow multiple DVRs, NVRs and IP cameras to combine their video storage. This eliminates the wasted storage of DAS solutions and increases the reliability of the video storage system by the use of RAID technology.

The move towards IP-based video surveillance has provided some new and in many cases unique solutions to the old problems of storage, retention and reliability. New ways and approaches to solve these problems are still emerging. As one manufacturer develops a new and different way to solve one of these problems, another will see yet a different way to solve the same problem. It is a never ending, but exciting, story of finding new ways to solve old problems.

Did you enjoy this article? Click here to subscribe to Security Magazine. 

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Podcasts

Changing the Perception of Security in Healthcare

In this Security exclusive, Gail Lenehan, President of the Emergency Nurses Association, and Bryan Warren, President of the International Association for Healthcare Security & Safety, discuss the reputation security has in the healthcare industry and its effect on workplace violence.

More Podcasts

THE MAGAZINE

Security Magazine

2013 May SEC

2013 May

This month in Security, discover how security can span the globe with our special feature on Securing the Global Enterprise. Also, determine how to do business in conflict zones, learn the top 11 errors in emergency planning, get smart about smartphones and study the consequences of performing temporary security for temporary employees.

Table Of Contents Subscribe

Situational Awareness

What is your level of certainty that your video network is performing all the time, meaning cameras are working and video is being recorded and is available for playback?
View Results Poll Archive

THE SECURITY STORE

comptiahighriseproductphoto
CompTIA Security+ Certification Study Guide
CompTIA's Security+ certification is a globally-recognized, vendor neutral exam that has helped over 60,000 IT professionals reach further and higher in their careers. The current Security+ exam (SY0-201) focuses more on being able to deal with security issues rather than just identifying them.
More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Vertical Sector Focus: Critical Infrastructures

criticalhomepagethumbFrom terrorism to vandalism, it’s preparedness, response, training and partnerships. Learn about some of the critical security issues facing this sector.

Visit the Critical Infrastructure page to read more.  

STAY CONNECTED

Facebook 40px 2-12-13 Twitter logo 40px 2-12-13  YouTube logo 40px 2-12-13  LinkedIn logo 40px 2-12-13